![[:uk]Gerb4002-green[:]](https://uea.com.ua/wp-content/uploads/2024/11/Gerb4002-green-150x150.png)
TMN ECOdesign is a three-phase oil step-down transformer with two windings and on-load regulation with improved energy-efficient characteristics in accordance with ECOdesign standards, according to part 2 of the Technical Regulations on Ecodesign requirements for small, medium and large power transformers approved by Resolution of the Cabinet of Ministers of Ukraine No. 152 of 27.02.2019, […]
On 1 January 2025, the second part of the Technical Regulation on Ecodesign Requirements for Small, Medium and Large Power Transformers, approved by Resolution No. 152 of the Cabinet of Ministers of Ukraine dated 27 February 2019 р., came into force, under which all older-model transformers must be replaced with energy-efficient ones, with the aim […]
KSO series assembled single-sided access chambers and their bus bridges are designed to complete switchgears (KSO 210) and dead-end substations (KSO 310) with a voltage of 6 or 10 kV AC, 50 Hz, in systems with an isolated neutral, installed indoors in temperate climates. These modern switching devices are developed to ensure the uninterrupted operation […]
VRU input-distribution device The VRU input-distribution device for internal installation in residential and public buildings is designed to receive, distribute and record electric energy with a voltage of 380/220 V three-phase alternating current with a frequency of 50 Hz. in networks with a dead-earthed neutral, for protection of lines in case of overloads and […]
SHRNN low-voltage cabinets are designed to complete 0.4 kV AC input devices with a frequency of 50 Hz with a grounded neutral and are used for receiving, distributing electricity, protection against overloads and short-circuit currents. SPNN and accounting cabinets can be completed with the statement of any manufacturer according to requirements of the customer. […]
Single-phase transformers of the OM series, developed by Ukrelektroaparat LLC, are high-quality devices designed for efficient conversion of electrical energy in various industries and energy. Transformers of the OMP series are designed to power cathodic protection devices. They are manufactured for voltages of 6 and 10 kV and capacities of 1.25; 2.5; 4; 6 and […]